CIF50 DHPRIO / DH485 PCI Data Highway Plus (DH+)Remote I / O DH-485

The DL-PCI (CIF50-DHPRIO) connects your PC's and MMI's via the Plug and Play PCI bus using existing AB DF1 Com Port drivers to A-B's DH+/DH-485. It is a lower cost alternative to A-B's 1784-PKTX card and SST's 5136-SD-PCI. The DH+ / RI/O Adapter / DH-485 Card is a PCI card to access AB's DH+ and RI/O networks. The Interface Card allows existing 1770-KF2, and PLC CH0 Serial DF1 drivers to run at the PC's PCI bus speed. This will allow MMI, HMI, SCADA equipment, and other computer applications access to any DH+ node including PLC's and SLC's.

All settings are accomplished using an easy to use Windows based Configuration Program over the bus or by using an external RS-232 connection to another computer.

Data Highway Plus (CIF50-DHPRIO)

Speeds: 57.6, 115.2, and 230.4 Kbaud

Configurable DH+ address (0 to 77o)

Remote I/O (RI/O)

Speeds: 57.6 K, 115.2 K, and 230.4 Kbaud

Occupy 1 to 7 virtual adapter Racks

128 bits of throughput data per rack

Up to 16 Block Transfer Reads and Writes per rack

DH-485 (CIF50-DH485)

Speeds: 4800, 9600 Baud, and 19.2 Kbaud

Configurable DH-485+ address (0 to 31 decimal)

SPECIFICATIONS:

Operating Environment: 32 to 122 °F (0 to 50 °C)

Storage: -40 to 185°F (-40 to 85°C)

Humidity: 5% to 95% non-condensing

Power: PCI Bus 5V - 1.5 watts

DF1: Full Duplex (Point to Point) and Half Duplex (Multidrop)

DF1: Either BCC or CRC Error Checking

Drivers for Windows 95/98/NT/2000/XP