The MicroMod M1 Module is a packaged version of the
MicroMod CPU. Since only a limited set of the Micromod's inputs and outputs can be brought out to the terminal blocks, several packaged versions are available in different configurations. The Mix 1 (M1) Version has a specific mixture of inputs and outputs:
6 digital inputs with following properties:
Pull-up or pull-down circuit selectable (in 3 groups)
Voltage swing 5 to 18 V
Schmitt trigger behavior, inverting
Low-pass behavior
Parallel connection of a frequency input (for each digital input 0 to 3)
for alternative use (e.g. at fast changes of state, or at count)
2 temperature inputs for connection of thermistors,
Measuring range 0 to 70 °C (32 to 158 °F)
2 analog inputs with following properties:
Pull-down circuit
Measuring range unipolar, 0 to 5 V
Measuring range extension possible Protection against
under voltage and over voltage
2 digital "frequency" outputs with following properties:
4 fast low-side switches, max. 55 V, 0.75 A
Short circuit protection
Status LEDs for power supply and digital outputs
NOTE:Since the MicroMod is programmed and configured over the CAN network using the free PC software provided, a PEAK PC to CAN interface is required (sold separately). We recommend the
CAN-USB adapter as the simplest interface to use for this purpose.
