Siren & Strobe Light Sensor

The combined strobe light and siren can add eye-catching audio visual alarms to the sensorProbe. When triggered, the siren will generate a loud alarm sound (hear a sample now) and the strobe light will flash brightly, giving a clear alert of an alarm condition.

The sensor plugs into any of our intelligent SensorProbes, such as the SensorProbe2, the SensorProbe8, or any SecurityProbe. The sensor can be extended up to 1,000 feet from the SensorProbe using standard CAT5 cable (a 5 ft cable is provided).

The siren and alarm are both incorporated into one device - only one RJ-45 jack is needed for each combined siren/alarm. Up to 2 devices can be plugged into RJ-45 jacks on the sensorProbe2 and 8 devices on the sensorProbe8.

When a combined siren / strobe light is plugged into the RJ-45 port, the sensorProbe will auto detect the sensor, and it will display the status of the device.

The siren / strobe light can be triggered manually, via the web interface, or it can be configured to turn on at certain times, through the web interface. The device can be triggered by any sensor connected to a sensorProbe, or by an alarm condition generated by the sensorProbe, and can be fully integrated with the sensor notification matrix on our Linux based systems.

Each device has its own SNMP OID so that status can be collected over the network and graphed using external application like MRTG.

CAT5 Enabled siren and strobe allows you to add up to 1000' of CAT5 cable to the unit.

Measurement range - Alarm or Normal

Communications cable - RJ45 jack to sensor using UTP Cat 5 wire

Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP

Sensor type - open/closed contact switch

Power source: powered by the sensorProbe. No additional power needed

sensorProbe auto detects the presence of the security sensor

Measurement rate - multiple readings every second

Up to 2 security sensors per sensorProbe2, 8 per sensorProbe8 and cameraProbe8

Full autosense including disconnect alarm