W900 Industrial Ethernet Bridge

The W900-IM is a long range, 900MHz wireless point to multi-point Industrial Ethernet Bridge. It is the low cost, high speed answer for creating a wireless Ethernet link between two or more locations. The W900-IM comes with a Rubber-Ducky antenna in a DIN Rail mount enclosure, ready for 8-24 VDC Power.

The W900 Bridge replaces costly wiring with a Wireless Ethernet connection that can enable reliable, secure, wireless Ethernet connectivity to your remote panel, SCADA node, HMI, Power Monitor etc. Run Industrial Ethernet protocols such as Modbus TCP wirelessly with the W900-IM. This 900 MHz Industrial Ethernet bridge offers the ideal combination of price, range, data rate, security, interference avoidance, Quality-of-Service and Ease-of-Use.

W900 FEATURES:

CHARACTERISTIC	SPECIFICATION/DESCRIPTION
RF transmission rate	1.536 Mb/s
Ethernet throughput	935 Kb/s
Output power	+21 dBm (4 Watts EIRP used with 15 dBi antennae)
Receive sensitivity	-97 dBm at 10e-4 BER (-112 dBm with 15 dBi antennae)
Radio link budget	148 dB with 15 dBi antennae
Range	40 miles LOS with 15 dBi antennae
Radio channels/bandwidth	12 non-overlapping with 2.0833 MHz spacing and 1.75 MHz occupied bandwidth
Manual frequency select	Channel selected with DIP switch
Connector types	RF: RPTNC Female / Ethernet: RJ45 10BaseT / Power: Terminal Block
Status LEDs	Power, Ethernet Link, RF RX, RF TX, 4/Channel, and 6/Link Quality
Error correction technique	Sub-block error detection and retransmission
Adjacent-band rejection	SAW receiver filter attenuates cellular and pager interference
Input Voltage	8-24 VDC
Temperature range	-40C to +70C
Transmit current draw	375 mA
Case Size	100mm x 36mm x 78 mm (HxWxD)  DIN Rail Mount

W900 Data SheetW900 User Guide