Wi-Fi - High Performance (A11) Modules
The High-Flying A11 modules are design for high performance applications normally, using 802.11b/g/n, Ethernet, and local serial ports. The A11 is available in two formats – SMT (surface mount) and DIP (2x7pins). A11 integrates an Ethernet and Wireless MAC, a baseband processor, a RF transceiver along with a power amplifier. The on-board software includes a complete Wi-Fi protocol, configuration utility and networking stack. Applications include access points, routers, serial to Ethernet, serial to Wi-Fi, Ethernet to Wi-Fi bridging and many others.
- 3.3V operation
- 802.11b/g/n
- A11
- access point
- antennas
- baseband processor
- CE Certified
- circuit board
- configuration utility
- Dial Switch
- DIP
- Ethernet
- Ethernet MAC
- ethernet to wi-fi
- external antennas
- FCC
- Flash memory
- General
- high performance modules
- Internal chip
- IPEX/U.FL antenna connector
- IPEX/U.FL connector
- IPv4
- IPv6
- Linux Operating System
- local chip antenna
- Low Cost High Performance MCU
- networking stack
- power amplifier
- Products
- RAM memory
- Remote Firmware
- RF transceiver
- RoHS compliant
- router
- Serial to Ethernet
- serial to wi-fi
- Serial UART
- SMA antenna connector
- SMA connectors
- Smart Link
- SMT
- STA / AP / AP+STA Modes
- surface mount
- WEP / WPA / WPA2 security modes
- Wi-Fi
- Wi-Fi modules
- Wi-Fi protocol
- Wireless
- wireless firmware
- Wireless MAC
- wireless modules
