An optional feature of the SensorProbe2 is the ability to have up to 5 dry contact inputs per RJ45. This software upgrade gives a total maximum possible inputs of 10 per sensorProbe2 by utilizing both of the RJ45 sensor ports. You must also select one or two 5-input dry contact cables to go with your sensorProbe2.
These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12.
|Communications cable||RJ-45 jack to sensor using UTP CAT5 wire.|
|Firmware||Input Range: 0 to 5 volts, settable under software.|
|Included software||Multiple readings every second.|
|Measurement range||Alarm or Normal|
|Measurement rate||Sensor: Open/closed contact switch|
|Product power supply||Powered by the sensorProbe. No additional power needed.|
We have the best technical support engineers that know how to use our products. If our Tech Support cannot solve your problem, we will contact the design engineer or manufacturer to help find a resolution.