{"product_id":"in-line-power-meter-32a","title":"In-Line Power Meter - 32A","description":"\u003cp\u003eThe AKCP In-Line Power Meter 32A (ILPM-32A) installs between an electrical source and a PDU or individual appliance. It measures voltage (V), current (A), active power (kW), total active energy (kWh), power factor, and leakage current at billable-grade accuracy. Alerts are sent via email or SNMP trap when configured thresholds are crossed.\u003c\/p\u003e\n\u003cp\u003eBecause the ILPM connects to the AKCP sensorProbe+ rather than embedding intelligence in a proprietary PDU, you can monitor standard power strips and individual devices without replacing existing hardware. The sensorProbe+ is hot-swappable, so the controller can be serviced or replaced without powering down the connected load. The ILPM also installs in-line rather than in a rack unit slot, freeing 0U space.\u003c\/p\u003e\n\u003cp\u003eUp to 16 ILPM units connect to a single sensorProbe+ base unit, all monitored from a single IP address. For larger installations, AKCPro Server supports centralized management across multiple sensorProbe+ units.\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0026\/8579\/6388\/files\/ILPM_featurebenefit_1024x1024.jpg?v=1790711156\" style=\"margin-right: 105.298px; margin-bottom: 16px; margin-left: 105.284px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChecking how close a circuit is to its breaker limit before adding equipment\u003c\/li\u003e\n\u003cli\u003eVerifying sufficient power headroom when expanding a rack\u003c\/li\u003e\n\u003cli\u003eBilling individual clients in co-location facilities based on measured kWh consumption\u003c\/li\u003e\n\u003cli\u003eMonitoring up to 16 appliances per sensorProbe+ from a single IP address\u003c\/li\u003e\n\u003cli\u003eRemotely switching connected devices on or off (with optional relay)\u003c\/li\u003e\n\u003cli\u003eAutomatically cutting power to a device when a smoke detector triggers (with optional relay and \u003ca href=\"https:\/\/www.gridconnect.com\/products\/ip-smoke-detector-sensor\" title=\"Smoke Detector Sensor\"\u003esmoke detecto\u003c\/a\u003er accessory)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003ePlatform Compatibility\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe ILPM-32A is compatible with AKCP sensorProbe+ platform units only. It connects via RJ-45 using UTP CAT5e\/6 cable and draws power directly from the sensorProbe+ - no separate supply required. On the sensorProbeX+, the sensor is supported on main module sensor ports only. On first connection or after a sensorProbe+ firmware upgrade, the sensor firmware may update and the unit may not be available immediately.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eOptional Upgrades - \u003cem\u003eMust be Added at Time of Purchase\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003ch4 dir=\"ltr\"\u003eRelay\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eAn optional latched relay enables remote on\/off switching of the connected load. The latched relay is bi-stable - it retains its state during a power loss and does not change state on restoration. Contacts are rated at 40 A.\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003eSmoke detection and latched relay integration\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003eWhen the ILPM-32A is configured with the optional latched relay, a \u003ca href=\"https:\/\/www.gridconnect.com\/products\/ip-smoke-detector-sensor\" title=\"AKCP Smoke Detector\"\u003esmoke detector\u003c\/a\u003e connected to an AKCP sensorProbe+ sensor port can be triggered when the device enters an alarm state. This cuts power to the connected load automatically, removing the electrical source contributing to heat buildup inside the rack.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eEnvironmental monitoring\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe Cabinet Thermal Map add-on integrates temperature sensing (ILPM-CTM) or temperature and humidity sensing (ILPM-CTHM) into the same unit, extending the sensor without requiring an additional port. Temperature range: -40°C to +75°C. Humidity range: 0–100% relative humidity.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eUpgraded Plug\/Outlet\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe base unit ships with bare wire on both ends and can be upgraded \u003cem\u003eat the time of purchase\u003c\/em\u003e to include sockets of your choice for power in and power out.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0026\/8579\/6388\/files\/ILPM_plugs_480x480.jpg?v=1790711086\" alt=\"Available plug types (power in)  IEC 60320 C14, IEC 60320 C20, NEMA 5-15P, NEMA 5-20P, NEMA 5-30P, NEMA L5-15P, NEMA L5-20P, NEMA L5-30P, UK BS, Shuko CEE 7\/7, IEC 60309 2P+E blue  Available outlet types (power out)  IEC 60320 C13, IEC 60320 C19, NEMA 5-15R, NEMA 5-20R, NEMA 5-30R, NEMA L5-20R, NEMA L5-30R, UK BS1363, Shuko CEE 7\/3 socket, IEC 60309 2P+E blue\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch5 dir=\"ltr\"\u003eAvailable plug types (power in)\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003eNEMA 5-20P, NEMA 5-30P, NEMA L6-30P, IEC 2P+E-32 \u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003eAvailable outlet types (power out)\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003eNEMA 5-20R, IEC 2P+E-32\u003c\/p\u003e","brand":"AKCP Co Ltd.","offers":[{"title":"Default Title","offer_id":45802396090391,"sku":"GC-AK-ILPM-32A","price":194.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0026\/8579\/6388\/files\/ILPM.jpg?v=1790711660","url":"https:\/\/www.gridconnect.com\/products\/in-line-power-meter-32a","provider":"Grid Connect","version":"1.0","type":"link"}