Temperature Sensor

You can plug in up to 2 temperature sensors on the SensorProbe2 and up to 8 on SensorProbe8, SensorProbe8-X20/X60 and SecurityProbe. The CAT5 Enabled version allows you to place the sensor up to 1000 feet from the SensorProbe using standard CAT5 cable (5 ft cable included). There is also a water resistance version of the sensor available if there is a chance that the sensor end could be submersed in water.

The sensorProbe auto detects the presence of the temperature sensor once plugged into the RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature variations over a period of time.

Each temperature sensor has its own SNMP OID so that the data can be collected over network and graphed using external application like MRTG.

The temperature sensor can be read using included SNMP utilities to allow graphing and data logging at 0.5°C resolution.

CAT5 Enabled version allows you to add up to 1000' of CAT5 cable to the sensor.

Never needs Calibration

Measurement range Celsius:-55°C to +75°C.

Measurement resolution Celsius: .1° increments.

Measurement accuracy Celsius: ±0.5°C accuracy from -10°C to +75°C.

Measurement range Fahrenheit: -67°F to +167°F.

Measurement resolution Fahrenheit: .1° increments.

Measurement accuracy Fahrenheit: ±0.9°F accuracy from +14°F to +167°F.

Communications cable: RJ-45 jack to temperature sensor using UTP CAT 5 wire.

Sensor type: semiconductor microprocessor controlled.

Power source: powered by the sensorProbe. No additional power needed.

sensorProbe autodetects the presence of the temperature sensor.

Measurement rate: one reading every second.

Up to 2 temperature sensors per sensorProbe2, 8 per sensorProbe8 and cameraProbe8.

Full autosense including disconnect alarm.