Serial RS232 CAN uVCCM Adapter

Our CAN to RS-232 converter can be used in virtual mode or command mode. No software needed in virtual mode, just put 2 devices on each end of the network and your RS232 devices are on the CANbus network. In command mode any serial device puts CAN messages directly onto a CANbus network.

Cross Reference: CAN-uVCCM


COMMAND MODE:

VIRTUAL CIRCUIT MODE:

 

Power Supply
Voltage	7 to 60 Volts DC input from standard wall transformer.
Power : Current	¾ Watt : 150 ma
COM RS232 Serial Port
Port Type	RS232 3-Wire DCE
Connector	Female DB9
Baud Rate	4800 to 57600
Data Bits	7 or 8
Parity	Odd, even, mark, space, or no parity
Stop Bits	1 or 2
Pin out	DCE (TX = 2 , RX = 3 , GND = 5)
Receive Msg Buffer	2 Messages
CAN Network Port
Transceiver	ISO11898 CAN Transceiver up to 1 mbit/sec
Isolation	up to 1000 VDC (optional)
Connector	Female DB9
Pinout	C.I.A. DS-102 (CAN_H = 7, CAN_L = 2, CAN_GND = 3)
Receive Msg Buffer	10 Messages
LEDs
RS232	TX & RX activity
CANbus	TX & RX activity
Power	Power on
Slew Rate Adjust
Range	MIN  >=  2.5 V/µs, MAX <= 20  V/µs
Method	Adjustable via potentiometer and screwdriver
Environmental
Temperature	Industrial Rated Components (-40C to +85C)

Serial RS232 CAN Manual