Browse the Bluetooth CD and navigate to \BU2073J\Toshiba XP,2K,ME,98SE V3.03.06\setup.exe. This will bring up the Toshiba Bluetooth stack for Windows setup screen. Click "Install" Navigate through the prompts, including the EULA. The software will prompt you to insert your Bluetooth device. Insert the BluePlug. Let the software finish installing. When it is done you will be prompted to restart your computer.
After restarting, you should see a Bluetooth icon in your task bar. Double clicking this icon brings you to the "Bluetooth Settings" screen. This is your main point of reference for anything Bluetooth on your computer. The main window displays all of your currently installed remote Bluetooth devices, such as a Firefly or Blueport XP. You can double click on a device pictured in this window to connect to it, or you can view its properties by clicking the detail button. You can also remove and uninstall the device by clicking the delete button.
To install your Firefly, BluePlug, or any other bluetooth device, click on the "New Connection" button. You will be presented with two choices, express mode or custom mode. In custom mode you can change the port number that you will use to connect to your Firefly or Bluetooth device. You will also be prompted to ensure your devices are discoverable. This is important. If you are installing a Firefly or Blueport XP, set the switches on the outside to match the settings below. Make sure the power is off while you do this, and that you turn the power back on after. Switches changed while the power is on will not take effect. The switches are usually labeled. If they are not, consult the manuals on the CD for diagrams.
Factory Defaults: OFF
Baud Rate: 9600
Auto Master: OFF
Auto Discover: ON
Once you have set your device to be discoverable, select either custom or express install and click next. Your BluePlug will begin to search for devices and a list of discovered devices will appear. If you have a Bluetooth enabled phone with its Bluetooth capability turned on and in range, your phone and BluePlug should be discovered by each other as well. Select which device you want to connect to and click next. The BluePlug will attempt to connect to the device. If prompted, enter the passkey 1234 for the Firefly or Blueport XP.
The next screen will prompt you to select which service of the device to use when connecting to a Firefly or Blueport XP. SPP will be the only option and is the serial port profile. Click next.
When in custom mode, you can now select which Com port to assign to the device. Click next. Your setup is now complete.
On the next screen is the opportunity to name the connection to this device and change the icon for it. Make your selections. Congratulations! You're Done! Now you can connect to your Firefly or BluePort in Hyperterminal or the Teraterm emulator included on the CD.