The airflow sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated. System reliability and safety could be jeopardized if this cooling airflow stops.
The airflow sensor plugs into any of our intelligent SensorProbes, such as the SensorProbe2, the SensorProbe8, or any SecurityProbe.
The sensor can be placed anywhere within 1,000 feet of the SensorProbe (5 ft cable provided).
The Airflow sensor is placed in the path of the air stream, where the user can monitor the status. The sensorProbe displays this on/off information using a graphical display via its web interface.
In addition to a web interface an SNMP interface is provided for alarm/normal status and to get the current analog value. SNMP traps sent when critical. SNMP polling via get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.
|Cat5 enabled||Allows you to add up to 1000' of CAT5 cable to the sensor (5 ft cable included).|
|Communications cable||RJ-45 jack to sensorProbe|
|Data collection||Data graphically displayed via webpage.|
|Indicators led||2 LED's indicate the status of Airflow and that the sensor is securely plugged into the sensorProbe|
|Measurement rate||One reading each second, data logging once per minute.|
|Power consumption||Typical 429.50 mWatt, 85.90mA|
|Power supply||Powered by the sensorProbe. No additional power needed.|
|Product power supply||Powered by the sensorProbe. No additional power needed.|
|Sensors||Type : Thermistor / On or Off|
|Temperature range||Operating Temperature : -20°C to 60° C|
|Trap information||Warning sensor number, Sensor description, On or Off condition|
|Type||Sensor: Thermistor-Open/closed contact switch|
We have the best technical support engineers that know how to use our products. If our Tech Support cannot solve your problem, we will contact the design engineer or manufacturer to help find a resolution.