IXXAT CAN/FD DIN Rail Repeater with Terminal Blocks

$250.00

SKU: GC-IXT-CAN-RPTR-FD
MPN: 1.01.0211.20000
Ixxat

Leave a review


Qualifies for free shipping to the continental US

Delivery: Ships within 3-4 weeks

Product Description

Extending and Segmenting CAN FD Networks

The Ixxat CAN/FD Repeater is a two-channel repeater with Galvanic isolation between each CAN channel and the power supply. It is used in CAN and CAN FD networks  for 

  • increasing the number of nodes a network can carry
  • physically coupling two CAN or CAN FD bus systems
  • inserting galvanic isolation between segments.

CAN/FD Repeater Integration

Each of the two CAN/CAN FD channels connects through a removable push-in connector with Shield, CAN-GND, CAN-Low, and CAN-High terminals. Power enters through a separate 3-pin connector (GND, V-, V+) at 10 V to 30 V DC. Bit rates from 14 kbit/s to 8,000 kbit/s cover both CAN and CAN FD traffic, with a TCAN1044 or compatible transceiver on each channel. The repeater adds a typical propagation delay of 175 ns, equivalent to 35 m of bus length. The unit mounts on a DIN rail in a 108 x 149 x 27 mm housing.

Isolation and Electrical Robustness

Galvanic isolation between the two CAN channels, and between each CAN channel and the power supply, is rated at a minimum of 5 kV DC for 1 minute. CAN shield to earth and power to earth are isolated at a minimum of 2 kV DC for 1 minute, protecting each segment up to 5 kV. The repeater is CE and FCC certified, rated IP20, and operates from -25 °C to +70 °C (-13 °F to 158 °F) in a PC ABS housing rated UL 94 V-0. Power consumption is under 1 W at 24 V.

Diagram colored in blue for CAN connectors 1/2 and Power Connector on white background

Termination and Configuration

Configuration is handled in hardware. Each channel has its own integrated CAN bus termination resistor, switched on or off independently with piano switches, so the repeater can sit at the end of a segment or within one.

The removable push-in connectors can be unplugged for wiring or unit replacement without disturbing the field wiring. Three LEDs show power status and CAN status for each channel.

Features


  • Provides two CAN/CAN FD channels
  • Supports bit rates from 14 kbit/s to 8,000 kbit/s
  • Isolates CAN-to-CAN and CAN-to-power at a minimum of 5 kV DC for 1 minute
  • Isolates CAN shield-to-earth and power-to-earth at a minimum of 2 kV DC for 1 minute
  • Integrates a termination resistor on each channel, switchable by piano switch
  • Uses removable push-in connectors for CAN and power
  • Adds a typical propagation delay of 175 ns (35 m bus length)
  • Runs on 10 V to 30 V DC and draws under 1 W at 24 V
  • Mounts on a DIN rail in a 108 x 149 x 27 mm housing
  • Shows power and per-channel CAN status on 3 LEDs
  • CE and FCC certified


Documents and Drivers

Documentation

CAN/FD Repeater Datasheet 1.01.0211.20000

CAN-FD-Repeater-Standard - FCC Declaration of Conformity

CAN-FD Repeater Standard Safety Leaflet

CAN-FD Repeater Standard Manual

Downloads

Step 3D file for CAN/FD Repeater Standard

Specifications

CAN/CAN FD channels

2

CAN high-speed interface

Removable push-in connectors

CAN connector pinout

Shield, CAN-GND, CAN-Low, CAN-High

Power connector pinout

GND, V-, V+

CAN FD bit rates

14 kbit/s to 8,000 kbit/s

CAN/CAN FD transceiver

TCAN1044 or compatible

CAN bus termination

Per channel, separately switchable by piano switches

CAN propagation delay

175 ns typical (35 m bus length)

Galvanic isolation, CAN-CAN and CAN-power

Minimum 5 kV DC for 1 minute

Galvanic isolation, CAN shield-earth and power-earth

Minimum 2 kV DC for 1 minute

Display

 3 LEDs (1 x power, 2 x CAN)

Power supply

 10 V to 30 V DC

Power consumption

 Less than 1 W at 24 V

Operating temperature

-25 °C to +70 °C (-13 °F to 158 °F)

Storage temperature

-40 °C to +80 °C (-40 °F to 176 °F)

Relative humidity

0% to 90%, non-condensing

Protection class

 IP20

Housing material

 PC ABS, UL 94 V-0

Mounting

DIN rail

Dimensions

108 x 149 x 27 mm (4.25 x 5.87 x 1.06 in)

Weight

135 g (4.76 oz)

Certifications

CE, FCC

FAQs

Does the Ixxat CAN/FD Repeater support both CAN and CAN FD?

Yes. Both channels support CAN and CAN FD at bit rates from 14 kbit/s to 8,000 kbit/s, using a TCAN1044 or compatible transceiver. If you're unsure whether the repeater fits your network's bit rate or topology, call Grid Connect at (630) 245-1445 and our team will help you review your setup.

How does galvanic isolation protect my CAN network?

The repeater isolates the two CAN channels from each other and from the power supply at a minimum of 5 kV DC for 1 minute. CAN shield to earth and power to earth are isolated at a minimum of 2 kV DC for 1 minute. This protects each segment up to 5 kV, so overvoltage or ground potential differences on one segment don't carry over to the other.

Do I need external termination resistors?

No. Each channel has an integrated CAN bus termination resistor that you switch on or off independently with piano switches. Turn termination on when the repeater sits at the end of a segment and leave it off when the repeater sits within one.

How does the repeater affect bus timing?

The repeater adds a typical propagation delay of 175 ns, equivalent to 35 m of bus length. Include this in your bus timing calculations when planning segment lengths and bit rates, especially at higher CAN FD data rates.

How do I wire and power the CAN/FD Repeater?

Each CAN channel uses a removable push-in connector with Shield, CAN-GND, CAN-Low, and CAN-High terminals. Power connects through a separate 3-pin connector (GND, V-, V+) at 10 V to 30 V DC, and the unit draws less than 1 W at 24 V. The repeater mounts on a DIN rail and operates from -25 °C to +70 °C (-13 °F to 158 °F).

Why Choose Us

Feel confident from search to shipment

We're committed to making your experience simple, transparent, and reliable. With customer-first guarantees and expert support, Grid Connect helps you choose the right solution with confidence.

Reviews

Have a Special Request?

What you can expect from Grid Connect:

  • High quality industrial networking and IoT solutions.
  • Hundreds of product options to fit your needs, many available to ship same or next day.
  • Unmatched technical support.
  • Customization options to fit your needs.
  • Price match guarantee on all products.