NIST2 Temperature & Humidity Sensor
NIST2 Temperature & Humidity Sensor
NIST2 Temperature & Humidity Sensor: THS01 1ft Fixed
Manufacturer: AKCP Co Ltd.
We've Got You Covered
The NIST2 temperature and humidity sensor can keep you current on conditions where both temperature and humidity can be critical, such as in Data Centers, remote sites and industrial controls. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
Compatible with sensorProbe+ (SP+) base units, setup is simple with the unit's autosense function. Once plugged into the intelligent sensor port on the base unit, it automatically detects the presence of the sensor and configures it for you.
All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.
The THS00 is supplied with a free 5ft cable, it can be extended using standard CAT5 up to 300 meters (1,000ft) from the AKCP base unit. The sensor can be mounted with screws and adhesive.
The THS01 is a 1ft fixed cable with a dual temperature and humidity sensor on the
THSxx custom lengths available
Custom lengths can be ordered to suit your needs. Call for information.
Manufacturer Part # (MPN)
|GC-AK-THS00-NIST2||5ft Extendable Cable||THS00-NIST2|
|GC-AK-THS01-NIST2||1ft Fixed Length||THS01-NIST2|
|GC-AK-THSxx-NIST2||Custom (Call to Order)|
- Temperature and Humidity Monitoring on a single sensor port
- Own SNMP OID for data collection via a network
- Temperature measurement from -55ºC – +75ºC
- Relative Humidity measurement from 0% – 100%
- Powered by base unit, no additional power needed
Documents and Drivers
NIST2 Temperature & Humidity Sensor Datasheet
- At 25°C
- Min : ±2%RH
- Max : ±5% RH
- THS00-NIST2: Run length is 1000 feet (300 meters) with approved low capacitance shielded cable or UTP
- THS01-NIST2: 1 Foot
RJ-45 jack to sensor using UTP CAT5e/6 cable
56mm x 55mm x 33.3mm (2.20in x 2.16in x 1.31in)
- ±0.5°C accuracy from -10°C to +75°C
- ±0.9°F accuracy from +14°F to +167°F
- -55°C to +75°C (-67°F to +167°F)
- 0 to 100% Relative humidity
sensorProbe+ series: 0.1°C (0.2°F) increments
- DIN rail mounting
- Screw mounting
Powered by the base units. No additional power needed
Typical 17.25mWatt, 1.45mA
1%RH increments, 0.01%RH sensor reading
Semiconductor, microprocessor controlled
Request a Quote
Curious about bulk pricing? Please fill out the information below and our sales team will provide a quote within 1 business day.
Enter up to two product names/SKUs and up to three quantities for each product. If more products/quantity quotes are needed, please include your requests in the message section below.
Please provide information where we can send your quote and reach you in the case where further information is required with the quote.
Please provide information where you'd like the products shipped to so we can give you the most accurate quote possible.
Please help us understand your use case so we can provide you with the best possible solution. This step is optional, so please feel free to skip it if you'd like.
Please confirm your request and we will get back to you within 1 business day.
Thanks for submitting your quote request. You should receive an email with a copy of your request shortly, and a member from our sales team will reply to you within 1 business day.
We have the best technical support engineers that know how to use our products.
If our Tech Support cannot solve your problem, we will contact the design engineer or manufacturer to help find a resolution.