The NET485-MB can change a serial port using Modbus RTU/ASCII Master/Slave to a Modbus TCP Ethernet port with no changes to your software. This simple device will take your serial modbus data stream and convert it to Modbus TCP Ethernet packets with software all packaged inside a simple cable.
The NET485-MB also contains Jumpers to enable optional Tx/Rx Termination Resistors.
Modbus firmware is preloaded and maps all current serial Modbus commands and registers to Ethernet Modbus TCP commands and registers.
|Baud rate||Modbus Serial: 2400, 4800, 9600, 19.2k, 38.4k, …115.2K|
|Configuration methods||Telnet configuration|
|Included software||CD with PC Setup and Virtual COM Port Software|
|Indicators led||Ethernet Activity, Power|
|Mounting||Optional DIN Rail and Surface Mount clips available|
|Serial interfaces||Terminal Block|
|Serial types||RS485, RS422|
We have the best technical support engineers that know how to use our products. If our Tech Support cannot solve your problem, we will contact the design engineer or manufacturer to help find a resolution.