
$1,175.00
Select products now include tariff fees—these will be shown as a separate line item at checkout.
The AC Voltage Sensor detects the presence or absence of line voltage. This is useful to tell when the UPS is running on battery power. This sensor is designed for use worldwide.
The sensor plugs into any of our intelligent sensorProbes and SecurityProbes. The sensor can be placed up to 1,000 feet from the SensorProbe using standard CAT5 cable (5 ft cable provided).
The AC Voltage Sensor indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor. There is an SNMP interface for getting the alarm/normal status. SNMP traps are sent when critical conditions occur. SNMP polling via 'get' is available to retrieve existing status and configuration parameters. The Web browser interface is also available to display the status and configuration parameters.
When an alarm condition is activated the description and location of the fault can be sent via email, page or traps.
AKCP AC Voltage Sensor Datasheet
AKCP Sensor Selection Summary
CAT5 Enabled
Allows you to add up to 1000' of CAT5 cable to the sensor
Communications Cable
RJ-45 jack to sensor using UTP CAT5 wire
Indicators LED
LED indicator on sensor shows if voltage present.
Measurement Indication
Alarm or Normal
Measurement Range
Detects voltage at 50V AC to 250 VAC
Measurement Rate
Multiple readings every second
MPN
acv00
Power Supply
Powered by the sensorProbe. No additional power needed
Type
Sensor: Open/closed contact switch
$1,175.00
$1,500.00
$763.00
Please fill out the information below and our sales team will respond within 1 business day.
What you can expect from Grid Connect: