$0.75
ESP32-D0WDQ6 - Bluetooth & 2.4 GHz Wi-Fi Combo Chip
ESP32-D0WDQ6 - Bluetooth & 2.4 GHz Wi-Fi Combo Chip
Product Images
ESP32-D0WDQ6 - Bluetooth & 2.4 GHz Wi-Fi Combo Chip
$0.80
Regular price: $1.22
SKU: GC-ESP32
MPN: ESP32-D0WDQ6
Manufacturer: Espressif Systems
Stock Status: In stock
We Have You Covered
Product Information
Product Description
Minimum Quantity Required: 10 chips.
--------------------------------------------------------------
The ESP32 is a single chip solution that combines Bluetooth and 2.4 GHz Wi-Fi capabilities. It is designed to perform extremely efficiently with its TSMC ultra low power 40 nm technology. This chip can be used for a variety of applications with a wide-set of features.
ESP32 contains less than 10 external components, making it an advanced solution for the Internet of Things (IoT) with its multitude of Wi-Fi and Bluetooth applications. The Printed Circuit Board (PCB) area contains the antenna switch, power amplifier, RF balun, filters, low noise receive amplifier, as well as power management modules. For single-chip integration of radio and base-band, the ESP32 utilizes CMOS. The integrated advanced calibration circuits make this chip capable of dynamically adjusting itself to external conditions, as well as being able to remove external circuit imperfections. This means that the mass production of ESP32 solutions will not require the use of expensive Wi-Fi testing equipment.
This chip is an advanced low power chip that is perfect for wearable electronics, mobile applications, and IoT solutions. Other powerful features include multiple power modes, dynamic power scaling, and fine resolution clock gating. In the situation of a low-power IoT sensor hub, the ESP32 would be woken up whenever a specified condition was detected. The amount of energy that the chip uses is reduced during this process due to the use of the low duty cycle. In addition, the output power of the power amplifier can be adjusted to achieve an optimal trade-off between power consumption, data rate, and communication range.
This module allows for the support of leading industry smart home standards including Apple HomeKit.
Features
- Built-In Antenna Switches
- Power Amplifier
- RF Balun
- Low Noise Receive Amplifier
- Power Management Modules
- Ultra-Low Power Consumption
- Compliant with Bluetooth v4.2 BR/EDR and BLE specification
- Bluetooth Class 1, Class 2, and Class 3 transmitter without external power amplifier
- BT 4.2 controller and host stack
- 802.11 b/g/n/e/i Wi-Fi
- Wi-Fi Antenna diversity and selection
- Fine Resolution Clock Gating
- Dynamic Power Scaling
- Supports the industry leading smart home standards including Apple HomeKit
Peripherals and Sensors
- 12-bit SAR ADC up to 18 channels
- 2 x 8-bit D/A convertors
- 10 x touch sensors
- On-chip temperature sensor
- On-chip Hall sensor
- 4 x SPI, 2 x I2S, 2 x I2C, 3 x UART
- CAN 2.0
- IR (TX/RX)
- Motor PWM
- LED PWM
Documents and Drivers
Documentation
ESP32 Datasheet
ESP32 Technical Reference Manual
ESP32 Hardware Design Guidelines
ESP32 Audio Design Guidelines
ESP32 Bluetooth Networking User Guide
ESP32 Bluetooth Architecture
Espressif HomeKit SDK Product Brief
BT/BLE Coexistence Demo
ESP32 Instruction Set and Examples
ESP32 FAQs
ESP32 Phy Init Bin Parameter Configuration Guide
ESP32 Flash Encryption Guide
Downloads
ESP32 RF Performance Test Demonstration
ESP32 Certification and Test
ESP32 AT
Flash Hardware Tools
Specifications
Controller(s)
- Infrared Remote Controller
- DMA controllers
- Bluetooth Link Controller
- BT 4.2 Controller
- SD/SDIO/MMC HOst Controller
- PID Controller
- Efuse Controller
- Media Access Controller (MAC)
- Pulse Width Modulation (PWM) controller
CPU
Xtensa® Dual-Core 32-bit LX6 microprocessors
Dimensions
Nominal - 6.0 x 6.0 x 0.75 mm
DMA
2
Interface(s)
- 4 x SPI, 2 x I2S, 2 x I2C, 3 x UART, CAN 2.0, IR (TX/RX)
- Motor PWM, LED PWM (up to 16 channels)
- 12-bit SAR ADC up to 18 channels, 2 x 8-bit D/A converters
- 10 x touch sensors
Memory
- 448 KByte ROM
- 520 KByte SRAM
- 16 KByte SRAM in RTC
- QSPI Flash/SRAM, up to 4 x 16 MBytes
MPN
ESP32-D0WDQ6
Pins
48 Pin QFN package
Power
Power supply: 2.2 V to 3.6 V
Protocols
- Wi-Fi: 802.11 b/g/n/d/e/i/k/r (802.11n up to 150 Mbps)
- Wi-Fi: A-MPDU and A-MSDU aggregation and 0.4 guard interval support
- Bluetooth: Bluetooth v4.2 BR/EDR and BLE specification
- Network: IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
Temperature Range
- Operating: -40°C to +125°C (-40º to 257ºF)
- Storage: -40ºC to 150ºC (-40º to 302ºF)
Watchdog Timer
Yes
You Might Be Interested In
Have a Special Request?
Please fill out the information below and our sales team will respond within 1 business day.
What you can expect from Grid Connect:
- High quality industrial networking and IoT solutions.
- Hundreds of product options to fit your needs, many available to ship same or next day.
- Unmatched technical support.
- Customization options to fit your needs.
- Price match guarantee on all products.
Please fill out the information below and our sales team will provide a quote within 1 business day.
Enter up to two product names/SKUs and up to three quantities for each product. If more products/quantity quotes are needed, please include your requests in the message section below.
Please provide information where you'd like the products shipped to so we can give you the most accurate quote possible.
Please help us understand your use case so we can provide you with the best possible solution. This step is optional, so please feel free to skip it if you'd like.
Please confirm your request and we will get back to you within 1 business day.
Thanks for submitting your quote request. You should receive an email with a copy of your request shortly, and a member from our sales team will reply to you within 1 business day.