IXXAT CAN-CR210 - CAN Fiber Optic Repeater with Backbone bus
CAN-CR210/FO repeater has 2 CAN interfaces, one which is Fiber Optic and enables the conversion of CAN signals from copper wire to fiber optics.
IXXAT CAN-CR210 - CAN Fiber Optic Repeater with Backbone bus
Product Images
IXXAT CAN-CR210 - CAN Fiber Optic Repeater with Backbone bus: F-SMA Connector
$609.00
SKU: GC-IXT-CR210-FO-FSMA
MPN: 1.01.0068.45010
Manufacturer: Ixxat
Antenna Connector Type
-
$609.00
-
$588.00
We Have You Covered
Product Information
Product Description
The Ixxat CAN-CR210/FO repeater with 2 CAN interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. This conversion enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. It has an integrated CAN backbone interface.
Designed for industrial environments, it meets high demands for robustness, temperature ranges, and safety and has minimal impact on real-time behavior, equivalent to a short line length (ca. 60 m/300 ns delay). With transparent transmission, the device is compatible with all higher layer protocols.
Fiber Optic Interface
Fiber optic ensures uninterrupted data transmission in high-electromagnetic disturbance zones, enabling enhanced connectivity for critical applications and high performance. There are 2 options for the Fiber Optic Interface connection: F-SMA or ST .
System Reliability
System reliability is ensured by electrically isolating CAN segments and power, auto-separating network faults, and keeping the network operational. In case of disturbances in the CAN lines, the repeater automatically disconnects the affected segment and restores it after the fault is resolved, ensuring uninterrupted network operation. Integrated bus termination resistors (120 Ohm, switchable via DIP switch) prevent reflections on the line ends and ensure optimum communication.
System Protection
Using the CAN-CR210/FO, network components can be galvanically isolated up to 1 kV. This reliably enhances the protection of the device against damage to electronics caused by voltage peaks. The 2 CAN channels can be used to establish a physical coupling and galvanic isolation of two segments of both CAN bus systems.
Network Design
The CAN-CR210 helps to optimize CAN network structures by enabling extended layouts (stub lines, star and tree topologies). These optimized topologies enable simpler wiring, resulting in less cables and cost savings at installation and maintenance. To achieve tree or star topologies, multiple repeaters can be easily connected in series through the integrated backbone bus.
Order Summary
SKU | Fiber Optic Connecter | Manufacturer Part # (MPN) |
GC-IXT-CR210-FO-FSMA | F-SMA connector | 1.01.0068.45010 |
GC-IXT-CR210-FO-ST | ST connector | 1.01.0068.46010 |
Features
- Increased system protection
- Robust industrial use
- Robust fiber optic interface
- Fast and transparent operation
- Flexibility in CAN network design
- Improved network monitoring and fault recovery
- Cost savings due to simple wiring
- Enhanced network reliability
- Increased system protection
- 2 CAN channels for extended connectivity
- Backbone bus for simplified network expansion
- Integrated bus termination resistors
Documents and Drivers
Documentation
CAN-CR210/FO User Manual
CAN-CR210/FO Pin Information
CAN-CR210/FO Dimensions
CAN-CR210/FO EU Declaration of Conformity
Specifications
Content of Delivery
- CAN-CR210/FO repeater
- User manual
Dimensions (W x H x D)
100 x 120 x 22.5 mm (4.0 x 4.7 x 0.9 in)
Weight
With F-SMA connector: 122 g (0.27 lbs)
With ST connector: 180 g (0.4 lbs)
Mounting
DIN rail mount (bracket included)
Current Consumption
- Type Value at Vcc Nom (mA): 62
- Max value at Vcc nom (mA): 100
Input Voltage (V)
+9 V to +32 V DC
Isolation
1 kV DC for 1 sec.
Temperature
- Operating: -20°C ~ 70°C (-4°F ~ 158°F)
- Storage: -40°C ~ 85°C (-40°F ~ 185°F)
- Relative Humidity: 10 to 95 %, non-condensing
Enclosure
IP30, Polyamide housing for top hat rail mounting
Certifications & Standards
- CE
- FCC
- WEEE Category: IT and telecommunications equipment
- ETIM Classification: EC000698
- Protection Class IP: IP30
Connectors / Input / Output
- 1 x D-Sub 9 connector1 ,
- 1 x backbone bus
- 2 x F-SMA connector
- 1 x power connector
CAN Features
- CAN Mode: CAN high-speed (ISO 11898-2) with CAN choke (F-SMA connector unit only)
- CAN Baud Rate: Up to 1 Mbit/s
- CAN Transceiver: TI SN65HVD251
Request a Quote
Curious about bulk pricing? Please fill out the information below and our sales team will provide a quote within 1 business day.
As a trusted supplier of industrial networking and IoT products for more than 20 years, Grid Connect is your source for new solutions to old problems.
As a trusted supplier of industrial networking and IoT products for more than 20 years, Grid Connect is your source for new solutions to old problems.
Enter up to two product names/SKUs and up to three quantities for each product. If more products/quantity quotes are needed, please include your requests in the message section below.
Please provide information where you'd like the products shipped to so we can give you the most accurate quote possible.
Please help us understand your use case so we can provide you with the best possible solution. This step is optional, so please feel free to skip it if you'd like.
Please confirm your request and we will get back to you within 1 business day.
Thanks for submitting your quote request. You should receive an email with a copy of your request shortly, and a member from our sales team will reply to you within 1 business day.