
$12.44
$99.95
SKU: GC-CAN-USB-COM-FD-ISO
MPN: GC-CAN-USB-COM-FD-ISO
Manufacturer: Grid Connect Inc.
Stock Status: In stock
Connect to CAN FD and CAN networks with a PC using a simple serial interface. Using a USB connection, the device creates a virtual serial “COM port” on a PC and requires no special drivers or use of any proprietary software. Send and receive CAN messages with any COM port terminal software. The simple ASCII formatting of CAN messages makes it easy to write a software program to interface with a CAN bus.
The CANUSB COM FD is backward compatible with the original CANUSB COM device.
The CANUSB COM FD operates in either tunnel mode or command mode depending on the desired functionality. With a wide variety of settings and configuration parameters, this Interface device creates a powerful solution for interfacing between a Virtual USB COM Port and CAN.
When plugged into a USB port, the CANUSB COM FD will enumerate as a serial COM Port. This capability means the device can be used with any COM Port based software, including TeraTerm.
Drivers are standard in Windows XP and later, and are available for MAC and Linux.
NOTE: The CAN FD USB COM is NOT compatible with Peak System software.
CANUSB COM FD User Manual
CANUSB COM FD Windows Drivers
Baud Rate
Serial Baud Rate USB Virtual COM Port: 100 to 1000000
Connector(s)
Indicators LED
Isolation
3750 Vrms, 1500 VDC
MPN
GC-CAN-USB-COM-FD-ISO
Pinout
CAN Network Port: C.I.A. DS-102 (CAN_H = 7, CAN_L = 2, CAN_GND = 3)
Power Supply
Powered from USB Port (No Power Supply Necessary)
Temperature Range
-40°C to 85°C (-40°F to 185°F)
Transceiver
CAN Network Port: ISO 11898-2:2015 CAN Transceiver up to 4 Mbps
$12.44
$7.95
$340.00
$150.00
We have the best technical support engineers that know how to use our products.
If our Tech Support cannot solve your problem, we will contact the design engineer or manufacturer to help find a resolution.