Bluetooth RS232 Serial GRIDBluFly Pair
Bluetooth RS232 Serial GRIDBluFly Pair
Bluetooth RS232 Serial GRIDBluFly Pair: 220V - Europe (Except U.K.) - DTE (2 Male)
Manufacturer: Grid Connect Inc.
Stock Status: In stock
We've Got You Covered
The GRIDBluFly Pair, also known as BluFly Pair, can be configured to make a Bluetooth Class 1 wireless connection to replace or extend an RS232 cable. Range can be up to 300ft.
The two BluFly devices first need to be paired so they will transfer serial data between them. Set 1 device as the master (client) and the other as the slave (peripheral), and then set the configuration switches.
Once the two devices have paired, change Auto Discover to off for both devices to prevent the devices from inadvertently pairing with other devices on the next power on.
No software changes or drivers required!
Manufacturer Part # (MPN)
|GRIDBFP-2DCE-110||DCE (2 Female)||110V - U.S./North America||GRIDBFP-2DCE-110|
|GRIDBFP-2DCE-220||DCE (2 Female)||220V - Europe||GRIDBFP-2DCE-220|
|GRIDBFP-2DCE-NOPS||DCE (2 Female)||No Power Supply||GRIDBFP-2DCE-NOPS|
|GRIDBFP-2DCE-USB||DCE (2 Female)||USB Power Cable||GRIDBFP-2DCE-USB|
|GRIDBFP-2DTE-110||DTE (2 Male)||110V - U.S./North America||GRIDBFP-2DTE-110|
|GRIDBFP-2DTE-220||DTE (2 Male)||220V - Europe||GRIDBFP-2DTE-220|
|GRIDBFP-2DTE-NOPS||DTE (2 Male)||No Power Supply||GRIDBFP-2DTE-NOPS|
|GRIDBFP-2DTE-USB||DTE (2 Male)||USB Power Cable||GRIDBFP-2DTE-USB|
|GRIDBFP-DTE-DCE-110||Both (1 Male/1 Female)||110V - U.S./North America||GRIDBFP-DTE-DCE-110|
|GRIDBFP-DTE-DCE-220||Both (1 Male/1 Female)||220V - Europe||GRIDBFP-DTE-DCE-220|
||Both (1 Male/1 Female)||No Power Supply||GRIDBFP-DTE-DCE-NOPS|
|GRIDBFP-DTE-DCE-USB||Both (1 Male/1 Female)||USB Power Cable||GRIDBFP-DTE-DCE-USB|
- High speed RS232, with standard baud rates from 1200 to 921,600.
- Parity Even, Odd, or None, 7/8 Data Bits, 1 Stop Bit.
- Hardware flow control via RTS, CTS (local serial connection only).
- Modem control output (DTR) tied to flow control output (RTS) optional.
- Settings can be easily changed via local serial port connection.
- Mid-range Power (Class 1, 12dBm TX, 300’, 90m) Bluetooth™ radio
- Serial Port Profile (SPP) used for direct connect to Classic BT clients.
- Custom GATT profiles for BLE clients (peripheral role only).
- Green (connection), Yellow (TX/RX) and Green (Power) LEDs.
- Low power operation requires only 5VDC at 40ma when connected.
- Smallest possible form factor.
- DB9 Male or DB9 Female connector standard.
Documents and Drivers
2.4GHz RF PCB trace
Baud Rates other than 9600 or 115200 must be selected in command mode.
Master, Slave, Trigger Master, Auto-Connect
Serial: DB9 - DTE (male) or DCE (female)
CTS, RTS (local serial connection only)
- Outer diameter: 3.50mm (.14in)
- Inner diameter: 1.35mm (.05in)
- Length: 8 - 8.25mm (.31-.32in)
Hardware (RTS/CTS) or None
Even, Odd, or None
- Transmit/Receive (TX/RX) Data
- Connection Status
GRIDBFP-2DCE-110, GRIDBFP-2DCE-220, GRIDBFP-2DCE-NOPS, GRIDBFP-2DCE-USB, GRIDBFP-2DTE-110, GRIDBFP-2DTE-220, GRIDBFP-2DTE-NOPS, GRIDBFP-2DTE-USB, GRIDBFP-DTE-DCE-110, GRIDBFP-DTE-DCE-220, GRIDBFP-DTE-DCE-NOPS, GRIDBFP-DTE-DCE-USB
- Power Jack: 5VDC – 16VDC
- Input: (typically +5V)
SPP only, Custom GATT profiles for BLE clients
0°C to 70°C (32°F to 158°F)
Request a Quote
Curious about bulk pricing? Please fill out the information below and our sales team will provide a quote within 1 business day.
Enter up to two product names/SKUs and up to three quantities for each product. If more products/quantity quotes are needed, please include your requests in the message section below.
Please provide information where we can send your quote and reach you in the case where further information is required with the quote.
Please provide information where you'd like the products shipped to so we can give you the most accurate quote possible.
Please help us understand your use case so we can provide you with the best possible solution. This step is optional, so please feel free to skip it if you'd like.
Please confirm your request and we will get back to you within 1 business day.
Thanks for submitting your quote request. You should receive an email with a copy of your request shortly, and a member from our sales team will reply to you within 1 business day.
You Might Be Interested In
We have the best technical support engineers that know how to use our products.
If our Tech Support cannot solve your problem, we will contact the design engineer or manufacturer to help find a resolution.