The Security Sensor is a magnetic on/off switch which is used as an input to the sensorProbe. Security Sensors come in pairs. They are active switches that close when one half of the sensor is in close proximity to its mate. When the two sensor pairs are moved apart from each other they open. The sensorProbe senses closure and opening and reports the condition.
The Security Sensor plugs into any of our intelligent SensorProbes, such as the SensorProbe2, the SensorProbe8, or any SecurityProbe.
Security Sensors can be wired in series so that multiple sensors can use a single port on the sensorProbe. There are no reasonable limits on the distance of the security sensors from the sensorProbe. Security sensor with an ALARM/NORMAL indication in software. Can have an unlimited number of security sensors. Security sensors can detect doors, windows. SNMP interface for alarm/normal status. SNMP traps sent when critical. SNMP polling via get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.
|Communications cable||RJ-45 jack to sensor using UTP CAT5 wire.|
|Maximum extension cable length||305 m (1000 ft.) with approved low capacitance shielded cable or UTP.|
|Measurement range||Alarm or Normal|
|Measurement rate||Multiple readings every second|
|Power supply||Powered by the sensorProbe. No additional power needed.|
|Product power supply||Powered by the sensorProbe. No additional power needed.|
|Type||Sensor: Open/closed contact switch|
We have the best technical support engineers that know how to use our products. If our Tech Support cannot solve your problem, we will contact the design engineer or manufacturer to help find a resolution.