
$149.95
$169.00
SKU: GC-WI232-PLUS-DCE-MB-TB
MPN: GC-WI232-PLUS-DCE-MB-TB
Manufacturer: Grid Connect Inc.
Stock Status: Out of stock
The WI232+ MB is the next generation of Wi-Fi to serial Modbus gateway servers. Besides new enhanced software features, there are the following capabilities.
The WI232+ is simple to configure using the Soft AP feature. When it is powered-up, the WI232 broadcasts an easy to recognize SSID. Simply join its WiFi Network with your smartphone, tablet or wireless PC, and a configuration webpage will display. This page is where you can set up the serial port, and provide the credentials for the WI232+ to join your WiFi network.
The WI232+ can be used to “tunnel” serial Modbus communication or to bridge between Modbus/TCP and Modbus serial protocols. The WI232+ converts a serial Modbus RTU/ASCII device into an Ethernet Modbus TCP device. All standard Modbus commands and messages are automatically converted. The limitations of a serial network are removed.
Custom versions, board level, white-label and private label versions available.
SKU |
Link |
Power Supply |
Manufacturer Part # (MPN) |
---|---|---|---|
GC-WI232-PLUS-DTE-MB-110 | DTE (male) | 110v | GC-WI232-PLUS-DTE-MB-110 |
GC-WI232-PLUS-DTE-MB-TB | DTE (male) | Terminal Block | GC-WI232-PLUS-DTE-MB-TB |
GC-WI232-PLUS-DCE-MB-110 | DCE (female) | 110v | GC-WI232-PLUS-DCE-MB-110 |
GC-WI232-PLUS-DCE-MB-TB | DCE (female) | Terminal Block | GC-WI232-PLUS-DCE-MB-TB |
WI232+ Modbus/TCP Datasheet
Antennas
4.3 inch Omni-directional “rubber duck” antenna, 2.4GHz, 2.5 dB, RPSMA, 50Ohm, 20W
Certifications
Connector(s)
DB9 Connector (Male or Female) – custom versions possible
Data Bits
7 or 8
Dimensions
Firmware
Upgradeable Over the Air (OTA)
Humidity
5% to 95% non-condensing
Interface(s)
MPN
Product Weight
62.4 g (2.2 oz)
Security/Protection
256-bit AES Encryption (Tunnel Mode)
Software
Virtual COM port software
Stop Bits
1 or 2
Temperature Range
-40°C to +85°C (-40°F to +185°F)
We have the best technical support engineers that know how to use our products.
If our Tech Support cannot solve your problem, we will contact the design engineer or manufacturer to help find a resolution.